Transfer matrix method for analyzing dynamic response of multi-span elastically supported SFT under moving load

Abstract

This paper proposed a new theoretical model for analyzing the submerged floating tunnel(SFT) under moving load, whose boundary at two ends was regarded as elastic constraint, and the anchor cable was simplified as the discrete spring support. Besides, the tunnel joint was simulated as a flexural spring to connect two adjacent tube segments. The modes and natural frequencies of the model were solved by transfer matrix method, and the dynamic response of the SFT under moving load was investigated by the modal superposition method, which was verified by comparing with the results obtained by the general FEM software. The influence of boundary conditions, dissimilarity of cable stiffness and joint flexural stiffness on the dynamic response of the SFT was analyzed. The difference of the response between the beam on elastic supports (BOES) and the beam on elastic foundation (BOEF) was compared. The results showed that the boundary conditions had little influence on the vibration response of SFT's intermediate spans, but had great influence on the displacement and bending moment of the side span. Besides, even in the case when the frequency differentials of the BOES and the BOEF were small (1.84%), the displacements of the two models also had significant difference. The disparity of the cable stiffness and joint flexural stiffness had great influence on the distribution of displacement and bending moment of SFT.