Abstract
Biodiesel fuel, consisting of methyl esters of long chain fatty acids produced by transesterification of vegetable oils or animal fats with methanol, is a promising alternative diesel fuel regarding the limited resources of fossil fuels and the environmental concerns. In this work, an environmentally benign process for the transesterification of soybean oil to methyl esters using alumina loaded with potassium as a solid base catalyst in a heterogeneous manner was developed. The catalyst loaded KNO 3 of 35 wt.% on Al 2O 3, after being calcined at 773 K for 5 h, it was found to be the optimum catalyst, which can give the highest basicity and the best catalytic activity for this reaction. The effects of various reaction variables such as the catalyst loading, oil to methanol ratio, reaction time and temperature on the conversion of soybean oil were investigated. The catalysts were characterized by means of XRD, IR and Hammett titration method. The results indicated that K 2O derived from KNO 3 at high temperature and that the Al–O–K groups were, probably, the main reasons for the catalytic activity towards the reaction. The catalyst activity was correlated closely with its basicity as determined by the Hammett method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.