Abstract
The control problem of a single flexible-link robot is addressed for tip position and trajectory tracking control, with no other actuators into the mechanical system than a servomotor installed at the rigid joint. A multi-modal cascaded-type model of the robot is obtained, where the angle of the rigid joint is considered as the control input for the flexible-link rather than the torque provided by the servomotor. A Sliding-Mode Control approach is used to overcome the rigid mode dynamics and ensure a precise tracking of a flexible-state dependent trajectory at the joint level. The proposed control scheme is simple, easy to implement and yet robust against parametric uncertainties. The main results show that, trajectory tracking at the tip of the flexible-link is achieved, with guaranteed closed-loop stability, since the problem is reduced to the tracking of an adequate trajectory at the joint level. The proposed results are validated with several experimental results. Finally, the control scheme is quantitatively compared with two different controllers for flexible robots.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.