Tractor–semitrailer model for vehicles carrying liquids

Abstract

This article presents a model for solving solid–fluid interactions in vehicles carrying liquids. A tractor–semitrailer model is developed by incorporating suspension systems and tire dynamics. Owing to the solid–fluid interaction, equations of motion for the vehicle system are coupled. To simplify the complicated solution procedure, the coupled equations are solved separately using two different codes. Each code is analyzed separately; but as the parameters of the two codes depend on each other, the codes must be connected at the end of each time step. To determine the dynamic behavior of the system, different braking moments are applied. As the braking moments increase, braking time decreases. However, it turns out that increasing the braking moment to more than a certain level produces no significant results. It is also shown that vehicles carrying fluids need a greater amount of braking moments in comparison to vehicles carrying solids during braking. In addition, as the level of the fluid inside the tanker increases, from one-third to two-third of the tanker’s volume, the sloshing forces applied to the tanker’s walls increase. It was also concluded that the strategy used in this article to solve for the solid–fluid interaction by incorporating vehicle dynamic effects represents an effective method for determining the dynamic behavior of vehicles carrying fluids in other critical maneuvers.