Traction prediction using soil parameters obtained with an instrumented analog device

Abstract

A fully instrumented device capable of measuring soil sinkage and shear parameters developed at the Agricultural Engineering Department, University of California, Davis was employed to conduct in situ sinkage and shear tests in a tilled and a farm, dry, Yolo loam soil. Similar tests were also conducted in a tilled, moist Yolo loam soil. An 18.4R38 tire was tested at different levels of inflation pressure and axle loads in these soil conditions. Soil parameters obtained using the instrumented device were related to the traction prediction equation parameters using traction mechanics, principle of conservation of energy and dimensional analysis.