Trace detection of the chlorohydrins of epoxidized soybean oil in foodstuffs by UPLC–ESI–MS/MS

Abstract

Epoxidized soybean oil (ESBO) is used as an authorized plasticizer and a stabilizer for plastic polymers such as poly(vinyl chloride) (PVC). Recently, however, there has been a concrete effort devoted to its substitution for other plasticizers such as polyadipates. ESBO is exploited particularly in food closure gaskets for metal lids used to seal glass jars and bottles. The closure gaskets form an airtight seal necessary to prevent microbiological contamination. Thus, there are potential uses for food sterilization and storage. Additionally, the main pathway of PVC degradation involves the elimination of HCl, which can react with the epoxy groups of ESBO to give mono-, polychlorohydrins and/or other cyclic derivatives. The European Food Safety Authority noted that not enough analytical and toxicological data exist to express a formal opinion on the significance for the health effects of such derivatives. At present in the scientific literature, there are only a few indicative results of direct measurements of ESBO derivatives and there are no official analytical methods available for the determination of chlorohydrins directly from foodstuffs. This study presents the first example of the analysis of commercial food sauces for the detection of ESBO-chlorohydrins (as methyl esters). The results are obtained by a dedicated development of an ultraperformance liquid chromatography-electrospray ionization-tandem mass spectrometry (UPLC-ESI-MS/MS) method. Sample preparation was based on the following main steps: organic extraction, transesterification and solid-phase extraction clean up. In particular, four isomers for 18-E-OHCl chlorohydrin and eight isomers for 18-2OHCl chlorohydrin were separated and identified. Different food sauces samples closed in glass jars with twist-off caps were subjected to qualitative determination, which yielded positive results for 18-E-OHCl, whereas no traces of 18-2OHCl were found.