Trace characterization of high-purity molybdenum and tungsten by electrothermal atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry, inductively coupled plasma mass spectrometry and total reflection X-ray fluorescence spectrometry involving analyte—matrix separation

Abstract

A technique for the separation of 42 trace elements from up to 5 g of molybdenum and tungsten matrices was developed by means of the radiotracer technique. It is based on adsorption of the analyses on the cation exchanger Dowex 50 W x 9 from a 4% H 2O 2/0.01 mol 1 −1 HNO 3 solution followed by their elution with 15 ml of 4 mol I −1 HNO 3 in the opposite flow direction. Both matrices were removed with a separation factor > 10 4. The separation technique was applied to the analysis of these materials by electrothermal atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry, inductively coupled plasma mass spectrometry and total reflection X-ray fluorescence spetrometry. For all the determination methods used, the limits of detection are given and compared with those of other methods. With inductively coupled plasma mass spectrometry, for 22 of the 30 assayed elements, limits of detection at the sub-ng g −1 level were achieved. The results are compared with those obtained by radiochemical neutron activation analysis in this work and by glow discharge mass spectrometry, secondary ion mass spectrometry, isotope dilution mass spectrometry and by solution spectrometric methods in other laboratories.