Toxicity tests to assess pollutants removal during wastewater treatment and the quality of receiving waters in Argentina.

Abstract

In Argentina, legislation to control adverse impacts of effluent discharges and the quality of receiving waters is scant and relies mainly on the physicochemical characteristics of the effluents and receiving waters. Objectives of this study were to use standardized acute toxicity tests to assess treatment of petrochemical industry effluents and the toxicity of various treated industrial effluents in the Buenos Aires metropolitan area and their receiving waters. Tests for the first objective used Daphnia magna and Ceriodaphnia dubia; those for the second used D. magna, Spirillum volutans, and Scenedesmus spinosus. Chemical analyses demonstrated that the removal of aromatic hydrocarbon compounds (benzene, toluene, ethylbenzene, xylene, styrene, and naphthalene) from the petrochemical effluents ranged between 77 and 93%, but toxicity removal was significantly lower: untreated effluents were very toxic and treated effluents were very toxic to toxic [acute toxicity units (TUa) > 3]. Physicochemical parameters measured according to current Argentinian regulations indicated that industrial effluents (e.g., from textile and paper industries) were within established guidelines, but 25% of the samples were moderately to highly toxic (TUa > 1.33). However, for the receiving waters, toxicity tests were moderate to very toxic. The results show the need of including tests for toxicity of discharged effluents, and their effects on receiving waters of Argentina, especially for regulatory purposes.