Towards understanding the cutting temperature in ultrasonic vibration-assisted drilling based on the dynamic contact characteristics between the cutting edge and workpiece

Abstract

Compared with conventional drilling (CD), ultrasonic vibration-assisted drilling(UVAD) is experimentally proven a promising method to reduce the cutting temperature. But sometimes cutting temperature also becomes higher in UVAD than in CD. To further make clear the cutting temperature mechanisms in UVAD, this study aims to study the effect of tool’s ultrasonic vibration on the cutting heat generation and heat dissipation at a relatively micro level. Firstly, drilling experiments are designed to explore the variations of cutting heat under different ultrasonic vibrations. Then, to analyze the influence of ultrasonic vibration on the cutting heat theoretically, a kinematic model is developed to describe the dynamic contact between the cutting edge and workpiece in UVAD. Besides, a cutting heat analysis model based on the contact characteristics in UVAD is proposed to study and compare the variations of cutting heat generation. The effect of ultrasonic vibration on the cutting heat generation, heat dispassion, and the resultant cutting temperature under different machining in UVAD conditions are discussed. It is indicated from the theoretical analysis that more cutting heat tends to be produced due to the significantly increased sliding velocity on the cutting edge-workpiece interface when the ultrasonic vibration is applied. The analysis agrees with the experimental results that the cutting temperature in dry UVAD is higher than in dry CD. But on the other hand, ultrasonic vibration can also improve the lubrication and cooling effect under appropriate machining conditions, which is beneficial to the reduction in cutting temperature. The investigation shows the multifaceted influences of ultrasonic vibration on the cutting temperature in the drilling process in detail, which provides a reference for UVAD parameter optimization.