Abstract
Photonic integrated circuits currently use platform intrinsic thermo-optic and electro-optic effects to implement dynamic functions such as switching, modulation and other processing. Currently, there is a drive to implement field programmable photonic circuits, a need which is only magnified by new neuromorphic and quantum computing applications. The most promising non-volatile photonic components employ phase change materials such as GST and GSST, which had their origin in electronic memory. However, in the optical domain, these compounds introduce significant losses potentially preventing a large number of applications. Here, we evaluate the use of two newly introduced low loss phase change materials, Sb2S3 and Sb2Se3, on a silicon nitride photonic platform for future implementation in neuromorphic computing. We focus the study on Mach–Zehnder interferometers that operate at the O and C bands to demonstrate the performance of the system. Our measurements show an insertion loss below 0.04 dB μm−1 for Sb2S3 and lower than 0.09 dB μm−1 for Sb2Se3 cladded devices for both amorphous and crystalline phases. The effective refractive index contrast for Sb2S3 on SiNx was measured to be 0.05 at 1310 nm and 0.02 at 1550 nm, whereas for Sb2Se3, it was 0.03 at 1310 nm and 0.05 at 1550 nm highlighting the performance of the integrated device.
Highlights
Photonic integrated circuits (PICs) have recently become an established and powerful technology that supports many applications [1, 2]
The goal is to achieve in the optical domain similar advantages to those brought by field programmable gate arrays (FPGAs) over application specific integrated circuits (ASICs) in electronics [19]
One of the biggest challenges faced by programmable silicon photonics is the integration of low-loss non-volatile components in applications such as quantum computing [18, 20, 21], microwave photonics [14], neuromorphic computing [22, 23], Internet of Things (IoT) [24], and machine learning [25]
Summary
Photonic integrated circuits (PICs) have recently become an established and powerful technology that supports many applications [1, 2]. Phase change materials (PCMs) are being extensively studied for their use in photonic integrated circuits as they offer high refractive index contrast and are non-volatile. Addition of selenium to GST (GSST) presents an alternative solution to non-volatile low-loss phase change materials for photonic integrated circuits and different building blocks have been experimentally fabricated and tested.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.