Abstract

AbstractBarium strontium titanate solidly mounted resonators (SMR) were fabricated with three different acoustic Bragg reflectors (ABR) on a sapphire substrate. The three devices had ABR structures consisting of W/SiO2/W/SiO2, Mo/SiO2/Mo/SiO2, and Pt/SiO2/Pt/SiO2 respectively. The s-parameters of all three devices were measured. The results showed that the quality factor increased as a function of the material in the ABR structure. The quality factor for the devices with tungsten, molybdenum and platinum in the ABR structures are 101, 88, and 31, respectively. This investigation showed how the material in the ABR structure can contribute to the acoustic loss in the device.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.