Abstract
Dynamic light scattering (DLS) is a widely applied technique in multiple scientific and industrial fields for the size characterization of nanoscale objects in solution. While DLS is typically applied to characterize systems under static conditions, the emerging interest in using DLS on temporally evolving systems stimulates the latent need to improve the time resolution of measurements. Herein, we present a DLS microscopy setup (micro-DLS) that can accurately characterize the size of particles from autocorrelation functions built from sub-100ms time windows, several orders of magnitude faster than previously reported. The system first registers the arrival time of the scattered photons using a time-correlated single photon counting module, which allows the construction of the autocorrelation function for size characterization based on a time window of freely chosen position and width. The setup could characterize both monomodal (60 or 220nm polystyrene particles; PS) and multimodal size distributions (e.g., mixture of 20nm LUDOX and 80nm PS) with high accuracy in a sub-100ms time window. Notably, the width of the size distribution became narrower as a shorter time window was used. This was attributed to the ability of the system to resolve the sub-ensemble of the broad size distribution, as the broad distribution could be reconstructed by accumulating the distribution obtained by consecutive 80ms time windows. A DLS system with high temporal resolution will accelerate the expansion of its application toward systems that evolve as a function of time beyond its conventional use on static systems.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.