Abstract
Future engine requirements, including high-altitude flight of unmanned air vehicles, as well as an impetus to reduce engine cost and weight, are challenging the current state of the art in low-pressure-turbine airfoil design. These new requirements present low-Reynolds number challenges as well as the need for high-performance, high-lift design concepts. Here we report on an effort to expand the relatively well established aerodynamic design space for low-pressure turbine airfoils through the application of recent developments in transition modeling to airfoil design. Analytical and experimental mid-span performance data and predicted loadings are presented for four high-lift airfoil designs based on the Pack B velocity triangles. The new designs represent a systematic expansion of low-pressure turbine airfoil design space through the application of high-lift design concepts for front- and aft-loaded airfoils. All four designs performed as predicted across a range of operationally representative Reynolds numbers. Full-span loss data for the new high-lift designs reveal increased endwall losses, which, with the application of non-axisymmetric endwall contouring, have been substantially reduced. Taken holistically, the results presented here demonstrate that accurate transition modeling provides a reliable method to develop optimized, very high-lift airfoil designs. However, further improvements in endwall-loss mitigation technologies are required to enable the implementation of the very high-lift technology presented here in engine systems.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.