Abstract
A micromechanical model based on the three-phase method of cells is used to predict the effective properties and thermo-mechanical stresses in carbon fiber/epoxy composites that have been modified by the addition of elastomer. Three composite configurations are considered: (1) carbon fiber/epoxy without elastomer, (2) carbon fiber/epoxy containing an elastomer interphase between the fiber and the matrix and (3) carbon fiber/epoxy with elastomer dispersed in the bulk matrix. The variables investigated include the elastomer volume fraction, the elastomer placement and the fiber volume fraction. Results from the parametric study indicate that the composite response is significantly influenced by all three variables. Positive aspects are identified with respect to each elastomer configuration. In general, a thin, concentric elastomer interphase surrounding each fibril appears more beneficial to the reduction of tensile residual thermal stresses. However, elastomer dispersed in the matrix can also yield favorable stress profiles with relatively less degradation of the composite stiffness. The trends established are predicted to be essentially independent of the fiber volume fraction.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
