Total oxidation of propane using titania-supported platinum nanoparticles prepared through sol-immobilization

Abstract

A set of mono-metallic nanoparticles catalysts, including palladium, platinum, and gold supported on titania, were prepared via the sol-immobilization technique, and evaluated for the total oxidation of propane as a model reaction of volatile organic compounds (VOCs) oxidation, which is a wide-ranging group of organic pollutants that contribute to serious atmospheric problems. The results showed that 1 wt.% Pt/TiO2 was the most active catalyst toward CO2, as the catalyst was very active, and the complete conversion of propane was achieved with full selectivity toward CO2. The effect of the support type was investigated through the immobilization of platinum nanoparticles on CeO2 and γ-Al2O3. The results indicated that the catalytic activity follows the order 1% Pt/TiO2 > 1% Pt/CeO2 > 1% Pt/Al2O3. For the Pt/TiO2 catalyst, the influence of the calcination temperature and metal loading on the catalytic activity was investigated. There is a slight increase in the Pt particle size when raising the calcination temperature from 300 °C to 500 °C, which enhances the catalytic activity of 1% Pt/TiO2 at 500 °C. Furthermore, increasing the metal loading from 0.1 to 1 wt.% enhances the catalytic activity as a result of the increase in particle size. Different characterization techniques were utilized, including XRD, TEM, XPS, and MP-AES, to determine the structure-activity relationship, and together they indicate that the catalytic activity is influenced more by the particle size of Pt nanoparticles than by the oxidation state.