Abstract
A torsional vibration damper and method and apparatus for its manufacture. The outer inertia member carries a radially inwardly extending web, the web sandwiched by a pair of elastomer members. A two-piece hub sandwiches the elastomer members, the two hub pieces being held together as by swaging or by rivets. Tooling for the swaging mode of assembly is shown such that the elastomer members are deformed from an original to a final configuration, and the swaging then accomplished with a single continuous movement. The swaging assembly apparatus for the device includes Belleville springs, the apparatus limiting the maximum force applied to that portion of the hub members controlling the assembled elastomer thickness. The damper configuration facilitates low specific energy dissipation and large elastomer-to-metal interface area to thus tend to lower shear stress in the elastomer. In addition, should the elastomer fail in use, the damper inertia mass is mechanically constrained to remain with the hub assembly. The two hub pieces cause radial extrusion of the elastomer, the extruded portions contacting the inertia member, the latter guiding and defining the extrusions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
