Abstract
Current design wind loads for buildings and other structures are based upon model tests in low-speed boundary-layer wind tunnels that generate straight-line winds. Winds resulting from tornadoes that can occur during extreme weather events such as thunderstorms or hurricanes differ greatly from conventionally conceived atmospheric boundary-layer winds. This paper presents transient wind loads on a one-story, gable-roofed building in a laboratory-simulated tornado and compares them with the provisions of building standards. Tornadoes were simulated in smooth, open terrain with vortex core diameters from roughly five to twelve times the plan dimension of the building model (0.46 to 1.06 m). A 1:100 scale model of a building with dimensions of 9.1 m×9.1 m×6.6 m and gable roof angle of 35° was used for this study. Comparisons of peak loads measured in this study showed that tornado-like vortices can generate load coefficients greater than those prescribed by ASCE 7-05 for straight-line wind over open terrain....
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
