Abstract
In this paper a novel design procedure based on the integration of full wave Finite Element Analysis (FEA) and a topology design method employing Sequential Linear Programming (SLP) is introduced. The employed design method is the Solid Isotropic Material with Penalization (SIMP) technique formulated as a general non-linear optimization problem. SLP is used to solve the optimization problem with the sensitivity analysis based on the adjoint variable method for complex variables. A key aspect of the proposed design method is the integration of optimization tools with a fast simulator based on the finite element-boundary integral (FE-BI) method. The capability of the design method is demonstrated by two design examples. First, we developed a metamaterial substrate with arbitrary material composition and subject to a pre-specified antenna bandwidth enhancement. The design is verified and its performance is evaluated via measurements and simulation. As a second example, the material distribution for a Thermo-Photovoltaic (TPV) filter subject to pre-specified bandwidth and compactness criteria is designed. Results show that the proposed design method is capable of designing full three-dimensional volumetric material textures and printed conductor topologies for filters and patch antennas with enhanced performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.