Topology optimization design of hydraulic valve blocks for additive manufacturing

Abstract

The hydraulic valve block is a core component of an integrated hydraulic system. In practical usage, it exhibits problems such as material waste, long manufacturing cycle, significant energy loss, and leakage. Based on the aforementioned existing problems, this study presents the design of the hydraulic system valve block based on the valve block design principle. The internal valve channel of the hydraulic valve block is optimized for additive manufacturing technology to avoid auxiliary drilling, solve the problem of potential liquid leakage, and shorten the manufacturing cycle. Thus, it is more suitable for the production of customized complex hydraulic valve blocks. The multiobjective topology optimization method is applied to the lightweight design of the hydraulic valve block to save resources and decrease energy consumption. The results indicate that when compared with the original model, the minimum reduction rate of pressure loss in each oil circuit orifice after optimization of the hydraulic valve block corresponds to 32.02%, the maximum corresponds to 71.38%; the maximum stress of the final design corresponds to 542.9 MPa, which satisfies the material strength requirement; and the mass is decreased by 68.9%. Thus, the lightweight design of the hydraulic valve block is realized.