Tool life assessment of high strength cast iron alloys in dry face milling operations

Abstract

The advancement in cast iron alloy properties has led to more efficient materials, especially in the automotive industry. However, this progress has also increased the demand for more durable tools with greater resistance to cutting operations. Conducting an in-depth investigation into the impact of these materials on tool lifespan is crucial, as it directly affects productivity. The main objective of this study was to analyze the lifespan of uncoated cemented carbide tools during milling operations using four high-strength cast iron alloys under various dry cutting conditions. A full factorial Design of Experiment (DoE) (23) was employed. The input variables included cutting speed (vc) of 230 and 350 m/min, tool feed (fz) of 0.1 and 0.2 mm/tooth, and materials, namely cast irons (FC 250, FC 300(Mo), FC300(Mo+RG), and FV 450). Additionally, material tests were conducted on billets without holes to simulate mild cutting conditions and with holes for more severe machining conditions. The established machining operation was face milling without cutting fluid, with the axial depth of cut (ap) and radial depth of cut (ae) maintained constant at 1 mm and 60 mm, respectively. The results showed that FV 450 had the shortest tool life, as expected for the hardest and resistant material, with a maximum lifetime difference of 83 % less when compared to FC 250, the softest one that had the longest tool lifespan. The introduction of holes also significantly reduced the overall tool life by about 57 %. The findings highlight the importance of factors such as cutting speed, feed per tooth, material composition, impact, and workpiece surface quality, which significantly influence tool performance.