To shear failure of steel and fibre-reinforced concrete circular hollow section composite column at elevated temperature

Abstract

This study predicts the shear strength of steel fibre reinforced concrete (SFRC) members at elevated temperature using numerical modelling. The authors derived the stress-strain relation in the pure shear mode at ambient temperature based on a damage model calibrated at ambient and elevated temperatures. The model was validated on the special experimental arrangement for the pure shear mode of the SFRC in torsion. These results enables to determine the stress-strain diagram at elevated temperature. The shear strength of SFRC is compared with the compressive and tensile strength and used to observe reasons for experimentally observed failure model. The work is a part of comprehensive project focused on development of design models for the steel and SFRC composite columns with circular hollow section (CHS) at elevated temperature. Research includes two levels accuracy/complexity, allowing simplified or advanced approach to design following the coming changes in European standard for composite member design in fire, EN1994-1-2:2021. Experimental studies of the project include mechanical material tests of heated fibre-concrete samples in tension and compression, thermal uniform and non-uniform tests of insulated fragments of CHS and tests of full scale SFRC CHS columns in steady-state and transient-state regimes. Developing advanced FEM simulation of global mechanical behaviour of SFRC CHS columns is a multi-levelled composite mechanical and thermo-model and provide numerous numerical experiments. Together with steel material model in fire, validated FEM model of mechanical behaviour of fibre-reinforce concrete at elevated temperature is performed. Validated simplified and advanced thermal model of SFRC in CHS at elevated temperature gives temperature fields and moisture distribution inside section which depends on direction, heat flux, sizes and gives possibility to model different fire cases of full-scale columns in bending, shear, and buckling at elevated temperature. Proposed analytical and simplified FEM mechanical model of column is taking into account degradation of mechanical properties, analytical models of transfer of heat inside the column section and provides simple solutions for designers.