Abstract
The major element and heavy metal concentrations of post-precipitated sewage sludge (PPS) and its ash residue (PPA) were determined using microwave digestion followed by inductively coupled plasma optical emission spectrometry (ICP-OES) and mass spectrometry (ICP-MS). To the best of our knowledge, this has not been previously done. In both PPS and PPA the heavy metal concentrations were clearly below the average concentrations than those encountered in sewage sludge in Europe. The leaching efficiency of the metal (Al/ Fe) used as a precipitation agent from post-precipitated sludge and its ash residue with phosphoric acid was also investigated with previously optimized leaching conditions. Tests resulted in leaching efficiencies for Al of 85 ± 1% and 99.5 ± 0.7% for PPS and PPA, respectively which were produced with aluminum as precipitation agent for phosphorus. Sludge, which was produced using iron as a precipitation agent, had a leaching efficiency of Fe 36.6 ± 0.9% and 68.0 ± 1.1%, for PPS and PPA, respectively. The leaching efficiency for P was 94 ± 3% and 96 ± 5% for Al-PPA and Fe-PPA, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
