Ti−Si Mixed Oxides Prepared by Polymer in Situ Sol−Gel Chemistry with the Aid of CO2

Abstract

A method to prepare titania-silica binary oxides is proposed in this work. In this route, inorganic precursors tetraethyl orthosilicate (TEOS) and titanium isopropoxide (TIP) were simultaneously or sequentially impregnated into a polypropylene (PP) matrix using supercritical carbon dioxide as a swelling agent and carrier. Hydrolysis and condensation reaction of the precursors confined in a polymer network were induced by treating the composites in 1 mol.dm(-3) (1 M) HCl. Then the PP matrix was decomposed at higher temperature, and titania-silica binary oxides were obtained. The mixed oxides were characterized by X-ray diffraction and Raman, FTIR, and X-ray photoelectron spectroscopy. It was demonstrated that the structure of the oxides depended strongly on the procedure to impregnate the precursors. The simultaneous method, in which the TEOS and TIP were simultaneously impregnated into a PP matrix, resulted in mixed oxides with highly dispersed titanium oxide species in the SiO2 matrix, while the sequential method produced the mixed oxide with separate SiO2 and TiO2 phases which were connected by Ti-O-Si bands at the interface. The method described in this work provides a new route to control the texture of TiO2-SiO2 mixed oxide simply by the impregnation sequence.