Tire ABS-Braking Prediction with Lab Tests and Friction Simulations

Abstract

ABSTRACT The invention and application of antilock braking systems (ABS) has resulted in a significant improvement of traffic safety and a reduction of stopping distance, especially on wet roads [1]. The reason for this success is rather clear: ABS is designed to steer the braking process in the most efficient way by keeping an optimal level of tire slip. At the same time, it must be clear that ABS uses braking forces generated in the tire footprint, and really good braking is possible only with high-performance tires. The best way to probe tire performance is to build tires and test them. This is, however, a long and an expensive procedure, so prediction of ABS performance based on results of some simple experiments is a very attractive supplement to the development process. Tire-braking performance is related to the friction of rubber on a surface. Relevant friction mechanisms can include adhesion, rubber hysteresis, and various kinds of viscous friction. All of these phenomena depend on the local sliding velocity, load, and temperature of tread rubber. Tire blocks pass the footprint area of a braking tire very rapidly, but their dynamics are indeed influenced by ABS. All of these aspects make the problem of ABS-braking prediction very intricate. In this publication, we present an approach for prediction of the ABS-braking performance. The approach links friction measurements conducted in laboratory to tire tests results. The friction of six specially designed compounds was measured on dry and wet surfaces using a high-speed linear friction test rig. Obtained experimental results are analyzed with the aid of rubber friction theory [2,3] involving both surface and rubber as input parameters. It is demonstrated that lab friction test procedures can be used for prediction of ABS wet braking performance.