Abstract
In this study, TiO2 nanowires on TiO2 nanotubes arrays (TNWs/TNAs) and Au-decorated TNWs/TNAs nanostructures are designed and fabricated as a new type of photoanode for photoelectrochemical (PEC) water splitting. The TNWs/TNAs were fabricated on Ti folds by anodization using an aqueous NH4F/ethylene glycol solution, while Au nanoparticles (NPs) and Au nanorods (NRs) were synthesized by Turkevich methods. We studied the crystal structure, morphology, and PEC activity of four types of nanomaterial photoanodes, including TNWs/TNAs, Au NPs- TNWs/TNAs, Au NRs-TNWs/TNAs, and Au NPs-NRs-TNWs/TNAs. The TiO2 and Au-TiO2 samples exhibited pure anatase phase of TiO2 with (0 0 4), (1 0 1), and (1 0 5) preferred orientations, while Au-TiO2 presented a tiny XRD peak of Au (111) due to a small Au decorated content of 0.7 ± 0.2 at.%. In addition, the samples obtained a well-defined and uniformed structure of TNAs/TNWs; Au NPs (size of 19.0 ± 1.9 nm) and Au NRs (width of 14.8 ± 1.3 nm and length of 99.8 ± 15.1 nm) were primarily deposited on TNWs top layer; sharp Au/TiO2 interfaces were observed from HRTEM images. The photocurrent density (J) of the photoanode nanomaterials was in the range of 0.24–0.4 mA/cm2. Specifically, Au NPs-NRs- decorated TNWs/TNAs attained the highest J value of 0.4 mA/cm2 because the decoration of Au NPs and Au NRs mixture onto TNWs/TNAs improved the light harvesting capability and the light absorption in the visible-infrared region, enhanced photogenerated carriers’ density, and increased electrons’ injection efficiency via the localized surface plasmon resonance (LSPR) effect occurring at the Au nanostructures. Furthermore, amongst the investigated nanophotocatalysts, the Au NPs-NRs TNWs/TNAs exhibited the highest photocatalytic activity in the degradation of methylene blue with a high reaction rate constant of 0.7 ± 0.07 h−1, which was 2.5 times higher than that of the pristine TNWs/TNAs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.