Abstract
Titanium dioxide remains one of the most studied semiconductor for photocatalytic applications due to its low cost production, reduced toxicity, ability to break down the organic pollutants and possibility to achieve complete mineralization. In this work, we report on results of the photocatalytic activity of titanium dioxide nanotubes fabricated by electrochemical anodization technique in an electrolyte solution containing a mixture of hydrofluoric acid, ethylene glycol and phosphoric acid. The morphology and crystallinity of the obtained nanotubes were investigated by means of electron microscopy and it was found that nanotubes have a constant outer diameter of 200 nm and an internal conical shape where the diameter gradually decreases from 120 nm at the wide end to 50 nm at the narrow end. The transmission electron microscopy investigation defined two different phases of titanium dioxide obtained after annealing of amorphous TiO2 in air at 650 °C and 850 °C. Photocatalytic activity of the samples have been evaluated in methylene blue solution in the presence of dispersed nanotubes under visible and UV irradiation by means of UV/Vis spectroscopy. Anatase phase TiO2 shows the best performance degrading 85 % of dye in 25 min under UV illumination, while rutile phase with anatase inclusions shows the best results with a 50 % decay of dye concentration in 25 min under visible light illumination.
Highlights
Among the metal oxide semiconductors, titanium dioxide nanomaterials have attracted much attention in the last decades
We demonstrate the fabrication of titania nanotubes with both ends opened for photocatalytic degradation of Methylene Blue (MB) in water-based solution
Morphology study TiO2 nanotubes have been fabricated by electrochemical anodization technique of Ti sheets
Summary
Among the metal oxide semiconductors, titanium dioxide (titania, TiO2) nanomaterials have attracted much attention in the last decades. TiO2 is considered a semiconductor with high potential applications due to its advantageous optical and electronic properties, structural and chemical stability, non-toxicity and photocatalytic activity. These properties make titania an excellent material for solar energy conversion [1], applications in dye functionalized solar cells [2, 3], biomedicine [4, 5], microengines [6] and in other fields [7, 8]. The anodic oxidation technique is one of the most effective way to fabricate titania nanotubes due to its simplicity, self-ordering and low cost process [9]. This technique has the disadvantage because one end of nanotubes at interface with the Ti foil is closed. The nanotube membranes have limitation for some applications and an additional opening process is necessary
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
