TiO2 mediated heterogeneous photocatalytic degradation of moxifloxacin: Operational variables and scavenger study

Abstract

UV-A (485μWcm−2) TiO2-P25 mediated heterogeneous photocatalysis is investigated as an advanced oxidation technology for the removal of the fluoroquinolone (FQ) antibiotic moxifloxacin (MOX) in aqueous solution. The goal of this work is twofold. First, the degradation kinetics are investigated by changing operational conditions during the degradation reaction. The effect of the initial MOX concentration (12.5–124.6μmolL−1), catalyst concentration (0.25–8.00gL−1), changing the oxygen concentration (0%, 20%, 100%) in the inlet gas flow (60mLmin−1) and temperature (278–338K) on the photocatalytic degradation rate is investigated. An optimal MOX degradation is attained at a catalyst concentration of 5gL−1, 298K and air sparging at 60mLmin−1 resulting in an initial degradation rate of 16.2±0.3μmolL−1min−1 and a half-life time of t1/2=1.6min.Secondly, the aim is to gain a deeper insight of the photocatalytic degradation mechanism of MOX. Therefore an estimation of the participation of the different reactive species during the photocatalytic degradation of MOX is done using two scavengers in different concentrations. The role of hydroxyl radicals is monitored using isopropanol, and the participation of oxidative holes in the reaction mechanism is evaluated by the addition of iodine anions. The scavenger study indicates that holes are the dominant reactive species, contributing up to 63%, and that hydroxyl radicals participate for about 24% in the photocatalytic degradation of MOX. Reactive oxygen species created by conduction band electrons are probably of lower importance, <13%, during the photocatalytic degradation reaction of MOX.