Abstract

The particular physics of Laser Produced Plasmas (LPP) needs some diagnostic requirements. Specifically, the X-ray monitoring of the plasma is known to be difficult since typically X-ray emissions are concentrated in bursts from a few tens of ps to few ns, based on the power and pulse time width of the laser. Therefore, the energy measurement of the radiation coming from a single experimental run is basically unfeasible using conventional techniques. Additional particles can be produced from LPP experiments, especially high energy gamma photons and electrons. As a case study in recent experiments, carried out on VEGA-2 laser facility (CLPU, Salamanca, Spain), the aim was to produce neutrons through photonuclear reactions on different types of solid targets. We have used the Timepix3 chip, in a “side-on” configuration, in order to produce a quick estimate of the gamma photons energy involved in the reactions. This detector, based on silicon, is realized with a single chip of 256 × 256 pixels bump-bonded with a 14 mm × 14 mm × 300 μm silicon layer. Interaction of gammas with the detector in this configuration produces some characteristic clusters of pixels and, for each cluster, a variety of physical and morphological parameters can be defined. Based on some of these parameters, we have characterized the detector response using some known laboratory gamma sources and the related Geant4 simulations. This allows quick energy discrimination for the gamma photons coming from different experimental runs.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call