Abstract
Solar central receiver systems are viewed as one of the most promising concentrated solar power (CSP) technologies for power production, in which solar radiation is concentrated through large mirrors (heliostats) onto a central receiver. This is due to the fact that very high temperatures can be reached at the receiver and thus higher thermal efficiency can be achieved compared with other CSP technologies. Heliostat field layout optimization is an essential task for any solar central receiver system. In this paper, a heuristic algorithm, i.e. the differential evolution (DE), was employed to perform efficient optimization of the conventional radial staggered heliostat field layout using MATLAB. The model calculates all the required optical performance parameters at every step of the optimization process for each heliostat and consequently more reliable results are obtained as compared with many other optimization methods. Two cases were considered: one with single variable optimization and the other with multi-variable optimization. For the first case, the azimuthal spacing between the adjacent heliostats or the radial distance between the rows of heliostats were optimized independently and for the second case both of these variables were optimized simultaneously. Both cases were examined for high sun altitude angle and low altitude angle and a comparison study was performed between them to check their effect on the heliostat field efficiency. Finally, it was noted that varying the radial distance between the rows of the heliostats yields slightly better efficiency as compared with when optimizing the azimuthal spacing.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.