Abstract
The temporal behavior of the electron energy distribution function and plasma parameters in the vicinity of the substrate have been investigated in detail by performing time-resolved probe measurements in a pulsed and unbalanced magnetron argon discharge. A 20-kHz midfrequency unipolar dc pulse with an on-time average power of 160W and a duty cycle of 50% was applied to the metallic cathode target. It was found that the high-energy electrons with energies higher than the sheath potential energy are generated within a few microseconds after the dc pulse is turned on and the electron energy distribution functions during the pulse-on period show a bi-Maxwellian distribution with the high-energy electron group. In the afterglow after the dc pulse is turned off, the initial fast decay of the high-energy electrons and the subsequent diffusive slower decay of the low-energy electrons were observed. This temporal behavior of the electron energy distribution function reflected two-fold decay characteristics of electron density and electron temperature when approximated by a biexponential function with two characteristic decay times and an initial fast decay time of less than a few microseconds and a subsequent slower decay time of few tens of microseconds were observed. The temporal behavior of the other plasma parameters were presented and these results were explained in view of electron heating by deeply penetrating the high-voltage cathode sheath and electron transport.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.