Abstract

A blind discrete-cosine-transform-based phase noise compensation (BD-PNC) is proposed to compensate the inter-carrier-interference (ICI) in the coherent optical offset-quadrature amplitude modulation (OQAM)-based filter-bank multicarrier (CO-FBMC/OQAM) transmission system. Since the phase noise sample can be approximated by an expansion of the discrete cosine transform (DCT) in the time-domain, a time-domain compensation model is built for the transmission system. According to the model, phase noise compensation (PNC) depends only on its DCT coefficients. The common phase error (CPE) compensation is firstly performed for the received signal. After that, a pre-decision is made on a part of compensated signals with low decision error probability, and the pre-decision results are used as the estimated values of transmitted signals to calculate the DCT coefficients. Such a partial pre-decision process reduces not only decision error but also the complexity of the BD-PNC method while keeping almost the same performance as in the case of the pre-decision of all compensated signals. Numerical simulations are performed to evaluate the performance of the proposed scheme for a 30 GBaud CO-FBMC/OQAM system. The simulation results show that its bit error rate (BER) performance is improved by more than one order of magnitude through the mitigation of the ICI in comparison with the traditional blind PNC scheme only aiming for CPE compensation.

Highlights

  • A coherent optical offset-quadrature amplitude modulation (OQAM)-based filter-bank multicarrier (CO-FBMC/OQAM) system has recently become a promising candidate for high-speed long-haul optical fiber transmission due to its higher spectral efficiency (SE) and its robustness to channel impairments [1,2,3,4,5]

  • A 30 GBaud back to back (BTB) CO-FBMC/OQAM transmission system is simulated to evaluate the performance of the proposed blind phase noise compensation (PNC) scheme, which is built by Optisystem 17.0 and MATLAB

  • The base-band time-domain FBMC/OQAM symbols are generated after all PAM data sequences through IFFT and FBS-poly-phase network (PPN)

Read more

Summary

Introduction

A coherent optical offset-quadrature amplitude modulation (OQAM)-based filter-bank multicarrier (CO-FBMC/OQAM) system has recently become a promising candidate for high-speed long-haul optical fiber transmission due to its higher spectral efficiency (SE) and its robustness to channel impairments [1,2,3,4,5]. The original PN compensation (PNC) algorithms in CO-OFDM cannot be transplanted in CO-FBMC/OQAM systems. This is because the OQAM is employed between two immediate adjacent subcarriers, and the orthogonality between subchannels is ensured only in real plane. Due to the nonorthogonality in imaginary plane, the PNC and channel estimation techniques are severely restricted by the so-called intrinsic imaginary interference (IMI) in CO-FBMC/OQAM systems [19,20,21,22,23,24]. In [26], a pilot-based PNC method is used to suppress the IMI at the expense of SE, where a pilot structure consists of several additional data symbols surrounding a pilot symbol. Another alternative approach is a coding scheme, and data symbols surrounding a pilot are deliberately coded to eliminate the IMI in that pilot [26,27]

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call