Time Dependence of Viscosity of Alkali-Activated Fly Ash Based Geopolymer Mortar

Abstract

FA was used as the raw material, and the net slurry of FA base Geopolymer was set as the control group to study the influence of sand content, gradation, reaction temperature and time on the time dependence of the viscosity of alkali-activated fly ash based geopolymer mortar. The experimental results show that the curing reaction of alkali-activated fly ash based geopolymer mortar was affected by the temperature dependence of fluid viscosity and the activation energy of the chemical reaction, which is relatively complex. This paper will divide the whole polymerization process into three stages to elaborate. The increase of sand cement ratio will increase the viscosity of FA base polymer mortar. If the sand is too coarse or too fine, the viscosity of FA base polymer mortar will increase significantly, and the fine sand has a greater impact on the viscosity of FA base polymer mortar than the coarse sand. Increasing temperature will significantly accelerate the reaction speed and increase the influence of chemical reaction activation energy on the viscosity of the system while the too high temperature will make the viscosity of the system decrease more significantly in the reaction. This study will reveal the intrinsic relationship between the viscosity of geopolymer and the reaction process, the reaction mechanism of the curing process so that the reaction stage can be represented by the viscosity state of the slurry.