Time-Average Velocity and Turbulence Measurement Using Wireless Bend Sensors in an Open Channel with a Rough Bed

Abstract

This paper is motivated by the need to develop low cost, wireless velocity sensors for hydraulic research and application in streams. A velocity bend sensor (VBS) is a flexible plastic polyimide substrate sheet with an electronic resistor connected to a voltage divider. Drag of a moving fluid bends the sensor, changes the electronic resistance, and produces a voltage drop that can be related to the time-averaged freestream velocity of the fluid. VBSs were tested in a recirculating hydraulic flume with a gravel bed. The VBSs show transition from rigid to elastic bending with increasing freestream velocity, which can be described using dimensionless fluid and beam- bending properties. The relationship between stream velocity and voltage drop across the circuit is nonlinear. A semitheoretical approach to estimate time-averaged streamwise velocity from the voltage drop based on fluid drag, elastic member bending, and circuit principles is applied and shows good agreement with experimentally derived calibration curves. The triple decomposition theorem and spectral analysis are performed on VBS and acoustic Doppler velocimeter (ADV) time series. Results show that the VBS captures low-frequency character- istics of macroturblence present within the turbulent open channel flow but is unable to measure smaller-scale characteristics of eddy shed- ding for these hydraulic conditions. Turbulent intensity calculated using VBS data is 12% of that from the ADV attributed to the lack of detection of shedding-sized eddies. But, the linear fit between turbulent intensity from the VBS and ADV suggests that the VBS can be used as a proxy for more detailed turbulent measurements when applied in streams. DOI: 10.1061/(ASCE)HY.1943-7900.0000725. © 2013 American Society of Civil Engineers. CE Database subject headings: Probe instruments; Decomposition; Spectral analysis; Turbulence; Open channels; Velocity; Flow measurement.