Time and Crack Width Dependent Model of Chloride Transportation in Engineered Cementitious Composites (ECC).

Abstract

This paper aims to develop a chloride transport model of engineered cementitious composites (ECC) that can consider the influence of both exposure time and crack width. ECC specimens with crack widths of 0.1 mm, 0.2 mm and 0.3 mm were soaked into NaCl solution with periods of 30, 60, 90 and 120 days. The free chloride content profile was measured and used for the development of the transport model. Regression analysis was applied to build the time and crack width dependent models of apparent diffusion coefficient and surface chloride content. The results show that the crack width has significant influence on the free chloride concentration profile when it is above 0.2 mm and the time-dependent constant n decreases linearly with the crack width. The chloride transport model was obtained by subscribing the models of apparent diffusion coefficient and surface chloride content into the analytical solution of Fick’s second law. The model was further validated with the experimental results, showing a deviation within 20%. The findings of the presented study can enhance the current understanding on the chloride transportation in ECC.