Abstract
Metal organic chemical vapor deposition (MOCVD)를 이용하여 사파이어 기판 위에 405 nm의 파장을 갖는 GaN light-emitting diode (LED)를 제작하였다. LED의 InGaN 활성층에서 생성되어 칩의 후면으로 향하는 광자를 전면으로 반사시키기 위하여, 사파이어 기판 후면에 반사막을 증착하였다. 반사막으로는 Al을 사용하였으며, 사파이어 기판에 대한 Al 박막의 접착력을 개선하기 위하여 사파이어 기판 후면에 Ti를 먼저 증착한 후에 Al을 증착하였다. Ti-Al 반사막을 채용한 결과, 광추출 효율이 52 % 향상되었다. GaN-based light-emitting diodes (LEDs) of a 405 nm wavelength have been fabricated on a sapphire substrate by metal organic chemical vapor deposition (MOCVD). In order to reflect the photons, which are generated in the InGaN active region and emitted to the backside, to the front surface, a reflection layer was deposited onto the back of the substrate. Aluminum was used as the reflection layer and Al was deposited on the sample followed by Ti evaporation for firm adhesion of the reflection layer to the substrate. The light extraction efficiency was enhanced 52 % by adoption of the Ti-Al reflection layer.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
