Abstract
Ti/Al/TiC mixed powders were used as the raw materials for the fabrication of functionally graded material (FGM) by hot pressing sintering. The sample was analyzed by SEM combined with Metallographic microscope and Energy Disperse Spectroscopy,The results show that each layer is composed of TiC and Ti2AlC, without containing other phases. The size of TiC grains are about 3-6 μm. With TiC content in the layers increasing, Ti2AlC grains gradually decrease. The lathy Ti2AlC grains of the FGM have a length of about 10 μm and a width of about 4 μm. The interface of each layer has a good combination with a certain thickness transition layer.Microhardness tester is used to analyse the hardness of material.The results show that the Vickers hardness of every layer increases with TiC content increasing. The thermal shock performance test found that material has good thermal shock performance.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
