Thrust measurement and thrust balance development at DLR\u2019s electric propulsion test facility

Abstract

Electric space propulsion thrusters only produce low thrust forces. For the fulfillment of a space mission this implies long thruster runtimes, and this entails long qualification times on ground. For such long testing times, a ground facility requires a vacuum chamber and a powerful pumping system which can guarantee high vacuum over extended times and under thruster gas load. DLR’s STG-ET is such a ground test facility. It has a high pumping capability for the noble gases typically used as propellants. One basic diagnostic tool is a thrust measurement device, among various other diagnostic systems required for electric propulsion testing, e.g. beam diagnostics. At DLR we operate a thrust balance developed by the company AST with a thrust measurement range of 250 mN and capable of thruster weights up to 40 kg. Adversely, it is a bulky and heavy device and all upgrades and qualification work needs to be done in a large vacuum chamber. In order to have a smaller device at hand a second thrust stand is under development at DLR. The idea is to have a light and compact balance that could also be placed in one of the smaller DLR vacuum chambers. Furthermore, the calibration is more robust and the whole device is equipped with a watercooled housing. First tests are promising and showed a resolution well below 1 mN. In this paper we give background information about the chamber, describe the basics of thrust measurement and the development of a new balance.