Abstract
One of the primary challenges faced by visible light communication (VLC) systems employing optical orthogonal frequency division multiplexing is the peak-to-average power ratio (PAPR). This study is dedicated to designing, simulating, and evaluating bit error rate (BER) and PAPR reduction methods tailored for the VLC broadcasting system. The asymmetric clipped optical orthogonal frequency division multiplexing (ACO-OFDM) scheme is highlighted in this work for its impressive performance. Therefore, the proposed PAPR mitigation methodologies applied to ACO-OFDM. The proposed PAPR reduction strategy involves 5 distinct precoding methodologies. The PAPR was mitigated by 3.485 dB after applying the DST precoding methodology. Still, the WHT precoding methodology can achieve PAPR reduction by 1.131 dB, without BER performance degradation, with respect to the conventional ACO-OFDM system. Furthermore, the work addresses another challenge in VLC systems: the bit error rate (BER). This is accomplished by introducing approaches to Time Domain Noise Cancelation and Frequency Domain Noise Cancelation (FDNC). The BER performance of these 2 receiver models is nearly the same. The simulation results indicate the system performance enhancement after applying noise cancellation approaches by 1.65 dB at the 4-QAM modulation scheme and 2.97 dB at the 1024-QAM modulation scheme. The 16-QAM modulation scheme, after applying DST and WHT methodologies alongside noise cancellation approaches, can enhance both PAPR by 20.83% and 6.76%, but the Eb/N0 performance enhancement by 10.10% and 14.64%, respectively. Additionally, the effectiveness and validity of the proposed schemes are verified by comparing them with relevant literature reviews on PAPR reduction techniques and selecting an optimal choice among them.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.