Abstract
We measured the surface profile of the hidden face of a thermally actuated oscillating 4-μm-thick silicon microelectromechanical system (MEMS) bridge. To do this, we employed a stroboscopically synchronized supercontinuum light source incorporated into a scanning low-coherence interferometer. The instrument exploited the near-infrared part (1.1-1.7 μm) of the emitted spectrum and a camera sensitive to near infrared. The MEMS bridge was driven with 6.8-V sinusoidal voltage at 10 Hz, which resulted in oscillation amplitudes of 1.50 ± 0.07 μm and 1.35 ± 0.07 μm for the top and bottom surfaces, respectively. We believe this technique opens up new possibilities for validating simulation effort as well as for qualifying new device designs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have