Abstract
This article presented simulation and control of a liquid oxygen/liquid methane variable thrust rocket engine pressurized by the electric pump in the throttling process. To get a proper injection pressure drop, the variation of the injection area was investigated and determined. In the control scheme, the combustion pressure and mixture ratio were the targets. To simplify the control scheme, the pressure and mixture ratio were correlated to the oxygen mass flow rate and methane mass flow rate, respectively. By controlling the propellant mass flow rate, the target engine thrust was reached. In addition, the influence of mass flow rate measurement points on the control effect was analyzed. The simulation results showed that the designed controller can reduce the overshoot of the critical engine parameters. Therefore, the maximum temperature of the thrust chamber wall after the regenerative cooling was decreased. Consequently, the thrust control errors were within 3% except for the points where the thrust changed suddenly, which can meet the mission requirements.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
