Threshold flexoelectric deformations in homeotropic nematic layers

Abstract

Elastic deformations of nematic liquid crystal layers subjected to a d.c. electric field were studied numerically. The flexoelectric properties of the nematic material and the presence of ionic space charge were taken into account. Homeotropic alignment with finite surface anchoring strength was assumed. The director orientation and the electric potential distribution were calculated; the space charge density was also determined. It was found that the threshold voltage strongly depended on the parameters of the system. In particular, a threshold as low as a few tenths of a volt occurred under suitable circumstances. In the case of a negative dielectric anisotropy, Δ ε, such low values of the threshold voltage existed when the ion concentration was sufficiently high, and given sufficiently large magnitudes of the flexoelectric coefficients and a sufficiently small anchoring energy. If the ion concentration was low or if the flexoelectric coefficients were small or if the surface anchoring was strong, the threshold was equal to several volts. In the case of positive dielectric anisotropy, the threshold amounted to several tenths of a volt for a weakly anisotropic and highly conductive material. If the dielectric anisotropy was sufficiently high or if the ion concentration was sufficiently low, the threshold voltage increased with Δ ε and reached tens of volts. These results can be explained as the effect of the inhomogeneous electric field arising in the vicinity of the surfaces, due to the ionic space charge redistributed by the external voltage. They are qualitatively consistent with earlier experiments which show the effect of the ion concentration on the elastic deformations in flexoelectric nematics. They correspond also with theoretical results concerning the effect of the electric field produced by the surface polarization or by the adsorption of ions.