Abstract
The separation of oil-water emulsions has attracted considerable attention in recent years. The main challenge is to find new cost-effective ways to develop a separation technology that has the potential for scaling up treatment. In this study, benefitting from the idea in traditional chemical engineering processes, we report on three-dimensionally printed superhydrophobic poly(lactic acid) (PLA) packings for oil-in-water emulsion separation. Superhydrophobicity was achieved through a bioinspired modification process including selective solvent etching and nanoparticle decoration. The obtained superhydrophobic PLA packing has an air-water contact angle of 150° and a water adhesion force of 22 μN. A maximum separation efficiency of 95% was achieved while retaining a relatively high flux of 7.5 kL m-2 h-1 by tailoring the internal geometry. Our approach demonstrates a promising method to fabricate packings with user-defined and functional features. The relatively low-cost and efficient fabrication process is beneficial in industrial applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
