Abstract
This study aims to generate 3-D dynamic bipedal walking using two oscillators of a CPG approach based on its body dynamics. First, a 3-D biped, which inherited the aspect of the previous passive dynamic walker, was developed that contained flat feet with pressure sensors, ankle joints composed of ball joints surrounded by coil springs, telescopic knees, and actuated hip joints using a direct drive (DD) motor. The torso was controlled by the DD motors using a PD control scheme. Next, the Owaki–Ishiguro method was used with ground contact information in the phase oscillator to the knee joint. Finally, experimental tests were conducted to elucidate the effectiveness of the biped. A 3-D dynamic bipedal gait of RW06 was developed using knee oscillation based on the phase oscillator. Bipedal walking was excited only by the knee oscillation; therefore, the gait was strongly affected by the body dynamics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.