Abstract

Distributed energy resources (DERs), such as solar photovoltaics (PVs), are required to achieve a high performance and an efficient use of generated renewable power in grid-integrated applications, both in normal and fault operating conditions. In this article, a grid-following (GFL) multifunctional control strategy for a three-phase three-level T-type quasi-impedance source inverter (3L-T-type qZSI) is studied through simulation and experimental tests. The GFL functionality is achieved by a proportional–integral (PI)-based dq current controller for the active and the reactive power tracking. A PI-based dc controller is used for the dc-link voltage control by taking advantage of the quasi-impedance source (qZS) network ability for input voltage boosting. The dc–ac power conversion is accomplished through a space vector pulsewidth modulation (SVPWM) with inner capacitors voltages balancing capability and minimum common-mode voltage (CMV) generation. Besides, a low-voltage ride-through (LVRT) strategy was implemented to fulfill the fault requirements imposed by the Spanish standard. The simulation and experimental results demonstrate the abovementioned functionalities and validate the stability and good dynamic response of the grid-connected 3L-T-type qZSI. Thus, this work supposes a novel contribution due to the few works previously reported in the literature concerning the performance of this relatively recent inverter topology in grid-tied applications.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call