Abstract

Nd3+-doped fiber lasers at around 900 nm based on the 4F3/2 → 4I9/2 transition have obtained much research attention since they can be used as the laser sources for generating pure blue fiber lasers through the frequency doubling. Here, an all-fiber laser at 915 nm was realized by polarization-maintaining Nd3+-doped silica fiber. A net gain per unit length of up to 1.0 dB/cm at 915 nm was obtained from a 4.5 cm fiber, which to our best knowledge is the highest gain coefficient reported in this kind of silica fiber. The optical-to-optical conversion efficiency varies with the active fiber length and the reflectivity of the output fiber Bragg grating (FBG), presenting an optimal value of 5.3% at 5.1 cm fiber length and 70% reflectivity of the low reflection FBG. Additionally, the linear distributed Bragg reflector short cavity was constructed to explore its potential in realizing single-frequency 915 nm fiber laser. The measurement result of longitudinal-mode properties shows it is still multi-longitudinal mode laser operation with 40 mm laser cavity. These results indicate that the Nd3+-doped silica fiber could be used to realize all-fiber laser at 915 nm, which presents potential to be the seed source of high-power fiber laser.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.