Abstract
A series of 3DOM and non-3DOM metal oxide–silica composites were prepared and tested dynamically in a packed-bed reactor at room temperature to remove ethanethiol from a gas stream containing ethyl mercaptan in moist N2.The obtained sorbents were characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption–desorption techniques. The experimental results showed that the adsorption ability of different kinds of metal oxide–silica composites with 3DOM structure decreased in the sequence: 3D-CuO/SiO2 > 3D-NiO/SiO2 > 3D-Co3O4/SiO2 > 3D-ZnO/SiO2. The best ratio of CuO to SiO2 of 3DOM copper–silicon oxide sorbents for ethanethiol removal was found to be 1:2. The 3DOM structure could improve the removal activity of sorbents remarkably because of the high porosity with ordered interconnected macropores as well as the large surface area and high dispersion of CuO. It was also found that a moist atmosphere greatly benefited the adsorption of ethanethiol at ambient condition.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
