Abstract
For a right coronary artery, three-dimensional stress and strain distributions at a physiological intraluminal pressure and an axial extension ratio were computed on the basis of a two-layer elastic model. To validate the model, curves of external radius versus pressure and of axial force versus pressure were computed for three axial extension ratios. To analyze mechanical properties, stress-free configurations of media and adventitia, and the constitutive law of each layer in literature, were used. The present study showed that the peak circumferential stress and the peak axial stress appear in the media at the boundary between the media and adventitia. This result is due to the opening angle of the media being larger than π (rad) and the larger value of a material constant of the strain energy function for the media than for the adventitia. The circumferential stress and strain were discontinuous at the boundary. On the other hand, the radial stress was continuous at the boundary because of the boundary condition for stress. The circumferential stress and axial stress in the adventitia were almost uniformly distributed, and smaller than in the media. The residual stress and strain were also computed. The circumferential residual stress and strain were almost linearly distributed in each layer, although discontinuity appeared at the boundary between the two layers.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have