Abstract
Three-dimensional numerical study was performed for heat transfer characteristics and fluid flow structure of fin-and-oval-tube heat exchangers with longitudinal vortex generators (LVGs). For Re (based on the hydraulic diameter) ranges from 500 to 2500, it was found that the average Nu for the three-row fin-and-oval-tube heat exchanger with longitudinal vortex generators increased by 13.6–32.9% over the baseline case and the corresponding pressure loss increased by 29.2–40.6%. The results were analyzed on the basis of the field synergy principle to provide fundamental understanding of the relation between local flow structure and heat transfer augmentation. It was confirmed that the reduction of the intersection angle θ between the velocity field and the temperature field was one of the essential factors influencing heat transfer enhancement. Three geometrical parameters – placement of LVGs (upstream and downstream), angles of attack ( α = 15°, 30°, 45° and 60°) and tube-row number ( n = 2, 3, 4 and 5) – were also investigated for parameter optimization. The LVGs with placement of downstream, angles of attack α = 30° and minimum tube-row number provide the best heat transfer performance. The effects of the three geometrical parameters on heat transfer enhancement were also analyzed from the view point of the field synergy principle and it was found that the results can be well explained by the field synergy principle.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have