Abstract

ABSTRACT Vertical slot fishways allow energy dissipation as a function of the pool, longitudinal slope, baffle and vertical slot design. The mean and turbulent flow patterns in these structures must be compatible with the fish target. The design of these structures is commonly based on previous successful fishways as well as simplified theoretical equations and empirical relationships. To aid in the design of these structures, a three-dimensional hydrodynamic model was used to simulate the flow, and experimental studies were used to validate the model. The mean velocities, pressures and parameters indicative of turbulence were analyzed. The maximum flow velocities were up to 32% higher than the values obtained using a simplified theoretical equation. The evaluation of the volumetric dissipated power indicated that the mean value for the pool was lower than 150 W/m3; however, analysis of the spatial distribution showed that in some areas, the values can exceed 1000 W/m3. The results indicate that the numerical simulation was able to adequately represent the flow considering the computational cost involved. Accordingly, it can be used as a complementary tool for the design of new fishways and for the analysis of modifications in existing ones.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.