Three-Dimensional Numerical Simulation for Lateral Distortional Buckling Behaviour of Steel-Concrete Composite Beams

Abstract

Lateral Distortional Buckling (LDB) is a mode of instability in Steel-Concrete Composite (SCC) beams that is yet to be fully understood by the structural engineering research and design community. This work investigated numerical methods to understand the LDB behavior of SCC beams under negative moments that exhibit nonlinear behavior. Focus of the study was to develop and validate 3-Dimensional finite element (FE) models which capture the LDB behavior of SCC beams precisely. Detailed 3-Dimensional FE models of the SCC beams were developed using ABAQUS. For modeling concrete, a nonlinear damage plasticity model was considered. A quad-linear curve was used to describe the stress-stain relationship for the steel beam. The stress-stain relationship for the rebar was described using a bi-linear curve while an elastic perfectly plastic model was assigned to the headed stud shear connectors. Steel hardening behavior was simulated using an isotropic hardening model. The interaction between the concrete slab, steel beam, and studs was described using appropriate interface elements combined under suitable constraints. The FE model’s accuracy was validated by results obtained from previous experiments found in literature together with a brief description of the experiments done by previous researchers to ensure completeness. Validation of the model was done by comparing Moment-Rotation curves obtained from the experimental tests, lateral displacements of the bottom flange along the axial direction and comparison of the failure modes between the numerical model and experimental test specimens. It was observed that the maximum relative error for the ultimate moment capacity of the composite beams from FE analysis and the experimental tests was less than 2% which shows that the FE model was in strong agreement with the experimental results. Accordingly, the numerical model developed herein proves to be capable of accurately representing the LDB phenomenon.